Stuck door, screaming spring, opener that won't respond. We dispatch a real technician with real parts, not a voicemail and a maybe.
People in Severance, CO don't call us because our name is easy to remember. They call because the last company left a door half-fixed, or quoted a job in pieces to pad the invoice. Garage Doors Repair Pro was built to close that gap: one technician, one visit, one honest number.
Our crews aren't subcontracted out to whoever answered a classified ad this week. Every technician who drives a Garage Doors Repair Pro van has been background-checked, trained on torsion and extension spring systems, and certified on the major opener brands still running in driveways across Severance, CO.
Our vans carry a working inventory, not a starter kit. Torsion springs in several sizes, extension spring pairs, galvanized cable, nylon and steel rollers, opener logic boards, and the sensors that keep a door from closing on a car bumper. If it's a common Garage Door part, it's already on the truck.

Spot one of these and a same-day call almost always beats waiting for the door to fail completely.
A grinding roller or a stressed spring will announce itself before it fails completely, if you're listening for it.
A door that refuses to close is almost always a sensor alignment issue or an opener setting drifting out of calibration.
Points to a broken cable, a worn extension spring, or a bent track pulling the panel out of square.
This usually means the mechanical link between motor and door has failed, not the electronics.
From a 2 a.m. jammed door to a full new installation, our technicians handle it with parts already on the truck.
A door stuck halfway isn't a weekend project, it's a security problem and a driveway blocker. Our emergency line runs around the clock for exactly this.
A mismatched spring either fails again within months or throws so much force into the opener that it burns out early. We calculate the correct spring specification for your door every time.
An opener that hums, stutters, or ignores the remote usually has one of a handful of causes, and we carry the parts to fix most of them on the first visit.
A new install is a full-day job done right: frame check, track alignment, weatherseal, balance test, and a walkthrough before we leave. We don't consider it finished until the door balances by hand with the opener disconnected.
One dented or cracked panel doesn't always mean a full replacement. We stock matching panel sections for major manufacturers and can often swap just the damaged section.
Doors that get a scheduled tune-up rarely end up on our emergency line. We check balance, tighten hardware, lubricate moving parts, and flag anything close to end of life.
A working knowledge of every major opener logic board and door construction type is what lets us diagnose fast instead of guessing.
A short call gets you a scheduled window, not a callback promise.
No hourly clock running, no per-part surprise fees added after the fact.
Our vans carry the springs, cables, rollers, and opener parts that cover most calls, so the fix usually happens in the same visit.
We don't call a job finished until the door opens, closes, and reverses exactly the way it should.
Every technician carries proper licensing and insurance, and passes a background check before wearing the Garage Doors Repair Pro name.
Pricing gets confirmed in writing before any repair begins, full stop.
Stuck doors don't wait for business hours, so neither do we. Our dispatch line runs nights, weekends, and holidays.
Our vans carry multiple spring sizes, cable, rollers, opener parts, and track sections, so most jobs finish in one visit.
Every repair comes with a written warranty on parts and labor, not a verbal promise that's hard to enforce later.
Our rating comes from actual service calls, not a marketing campaign. Scroll down and read what people say after the technician leaves.
Flat-rate pricing, a written warranty, and a technician who answers the phone next time too. That's the deal, every time.
Call +1-831-293-1591A torsion spring under load stores enough energy to cause serious injury if released with the wrong tool or technique. This is one job where licensing and hands-on training genuinely matter.
An opener will keep straining against a bad spring or bent track until it finally burns out, which usually means paying to fix both at once instead of one.
Manufacturer warranties typically cover defects, not wear from normal use, which is exactly what routine maintenance addresses.
“My door wouldn't budge and I had somewhere to be. They had a technician out same morning and it was fixed before lunch.”
“No games with the pricing. What they said on the phone matched exactly what I paid.”
“Installed a new door and opener in one visit, cleaned up after themselves, and walked me through the warranty paperwork.”
“Called at 9 p.m. on a Saturday expecting a voicemail and got a real person who scheduled someone for that night.”
“Tune-up caught a fraying cable before it snapped. Cheaper than the emergency call it would've turned into.”
“Panel got dented backing out the trash cans, and they matched the section instead of pushing a full replacement I didn't need.”
“Bent track from a fender-bender in the driveway, fixed in under two hours with no attempt to sell me parts I didn't need.”
“Smart-home compatible opener install went smoothly and the app actually works as advertised.”
Same-day dispatch is standard for most requests, with priority given to stuck-open and stuck-closed doors.
It varies by door and spring type, but the quote is locked in writing before the technician starts, so there's no surprise on the invoice.
We'll tell you honestly if the second spring is close to end of life, but the final call is always yours.
Often yes. We'll check the manufacturer and model before recommending a full replacement over a single-panel swap.
Most opener brands on the market today are ones our technicians carry parts and training for.
We quote honestly before dispatch, including any after-hours fee, so there's no surprise once the technician arrives.
Every job comes with warranty paperwork on the spot, not a verbal promise to remember later.
Likely a worn drive gear inside the opener housing, which our technicians carry replacement parts for on most calls.
Standard sizes are frequently available for fast turnaround, while custom openings may need a short lead time for the door itself.
Whatever the after-hours rate is, you'll hear it during the call, not read it as a surprise on the invoice.
We cover Severance, CO broadly. Scroll to the coverage section below for the full list of areas we dispatch to.
Spring replacement is one of the more dangerous DIY jobs in a home, given the stored tension involved. It's worth the call.
Most spring, cable, or opener repairs finish in one to two hours once the technician is on-site and has confirmed the part.
We never start work without a confirmed written number first, no exceptions.
Don't attempt to force the door closed by hand if a cable or spring looks broken. Keep kids and pets clear until the technician arrives.
Yes. We'll walk through the condition of the springs, track, panels, and opener, then give an honest recommendation based on age and repair cost, not a sales script.
Occasionally a very old door needs a sourced part, but the majority of repairs use stock components regardless of the door's age.
Call now and get a real appointment window, not a callback promise.
☎ Call +1-831-293-1591From downtown Severance to the outer neighborhoods, dispatch is built to reach you quickly.
Embedded Map Placeholder for Severance, CO