Stuck door, screaming spring, opener that won't respond. We dispatch a real technician with real parts, not a voicemail and a maybe.
People in Severance, CO don't call us because our name is easy to remember. They call because the last company left a door half-fixed, or quoted a job in pieces to pad the invoice. Garage Doors Repair Pro was built to close that gap: one technician, one visit, one honest number.
Every Garage Doors Repair Pro technician carries manufacturer training on torsion springs, extension springs, and the opener logic boards that control them, because guessing at spring tension is how people get hurt. We don't send apprentices out alone on jobs that call for a licensed hand.
We stock our vans the way a contractor stocks a job site: springs in multiple wire gauges, rollers, hinges, cables, openers from the brands Severance, CO homeowners already own, and the fasteners that hold it all together. That inventory is why most calls close in one visit instead of two.

A garage door rarely fails without notice. Catching one of these early usually means a repair instead of a full replacement.
A grinding roller or a stressed spring will announce itself before it fails completely, if you're listening for it.
This is one of the most common calls we get, and one of the fastest to resolve once a technician is on-site with the right tools.
A crooked door under power is a safety issue, not a cosmetic one, since the panel can come off the track entirely.
Often a stripped gear inside the opener unit or a disconnected trolley, both straightforward fixes with the right part on hand.
Six core service lines cover almost every call we take, all backed by the same flat-rate promise and written warranty.
When a garage door won't open or won't close, the clock matters more than the diagnosis. We treat every stuck-door call as same-day, not next-available.
This is the single most common call we get, and the one where cutting corners costs the most. We replace both springs on a torsion pair even when only one has failed, since the other is on the same clock.
Chain, belt, or screw drive, and whatever logic board sits behind the plastic cover, we work on the brands still running in driveways today and install the ones that will run for the next decade.
Sometimes a door has taken enough dents, rust, and warped panels that repair stops making financial sense. We install steel, aluminum, and insulated doors sized and hung to the opening, not forced to fit.
Nylon rollers run quieter and last longer than the steel rollers most doors ship with, and it's one of the cheapest upgrades that meaningfully cuts noise and wear.
A 20-minute tune-up, lubrication, and balance check twice a year catches the wear that turns into a 6 a.m. spring failure. It's the cheapest visit we do and the one that prevents the rest.
A working knowledge of every major opener logic board and door construction type is what lets us diagnose fast instead of guessing.
A short call gets you a scheduled window, not a callback promise.
We quote the job, not the hour, so the price doesn't creep while the work happens.
Most jobs close in under two hours once the technician is on-site and the part is confirmed on the truck.
Before leaving, we run a full balance and safety-reverse test, then walk you through what was replaced and why.
Licensing and insurance aren't optional line items here, they're the baseline before a technician gets dispatched.
No hourly billing, no mystery add-ons on the invoice. The quote you approve is the quote you pay.
A locked-out car or an exposed house at 11 p.m. gets the same urgency as a mid-morning call.
Our vans carry multiple spring sizes, cable, rollers, opener parts, and track sections, so most jobs finish in one visit.
We stand behind the work with paperwork, not just a handshake.
Our rating comes from actual service calls, not a marketing campaign. Scroll down and read what people say after the technician leaves.
We put our warranty in writing because a verbal promise is easy to forget and hard to enforce. If our work fails within the covered window, we come back free of charge.
Call +1-831-293-1591A torsion spring under load stores enough energy to cause serious injury if released with the wrong tool or technique. This is one job where licensing and hands-on training genuinely matter.
The opener only moves the door, it doesn't diagnose it. A door can be dangerously out of balance while the opener still runs it up and down without complaint.
Manufacturer warranties typically cover defects, not wear from normal use, which is exactly what routine maintenance addresses.
“The spring snapped at 6 a.m. and the truck was in my driveway two hours later. Fixed, tested, gone by 9.”
“They quoted the job upfront and never touched the number once the work started. Refreshing.”
“Installed a new door and opener in one visit, cleaned up after themselves, and walked me through the warranty paperwork.”
“Didn't expect anyone to answer that late, but they did, and the fix held up fine since.”
“Preventive visit found a roller about to fail. Glad I called before it stranded the car inside.”
“Didn't try to upsell a whole new door when a single panel swap solved it.”
“Bent track from a fender-bender in the driveway, fixed in under two hours with no attempt to sell me parts I didn't need.”
“Smart-home compatible opener install went smoothly and the app actually works as advertised.”
Typical response is same-day, and our emergency line covers evenings, weekends, and holidays.
Cost varies by spring size and door weight, and we confirm the exact number on-site before starting, with no hidden add-ons.
We'll tell you honestly if the second spring is close to end of life, but the final call is always yours.
We carry or can source matching panels for most major brands, which usually beats replacing the whole door.
Most opener brands on the market today are ones our technicians carry parts and training for.
We quote honestly before dispatch, including any after-hours fee, so there's no surprise once the technician arrives.
Yes, every repair includes a written parts-and-labor warranty explained before the technician leaves.
Likely a worn drive gear inside the opener housing, which our technicians carry replacement parts for on most calls.
Common sizes move fast, though a non-standard opening may add a day or two for the correct door to arrive.
Any after-hours or weekend fee is disclosed before dispatch, not buried in the final bill.
Our coverage across Severance, CO is detailed in the section below, with technicians positioned to reach most calls same-day.
Spring replacement is one of the more dangerous DIY jobs in a home, given the stored tension involved. It's worth the call.
Most spring, cable, or opener repairs finish in one to two hours once the technician is on-site and has confirmed the part.
We never start work without a confirmed written number first, no exceptions.
Don't attempt to force the door closed by hand if a cable or spring looks broken. Keep kids and pets clear until the technician arrives.
Every visit includes a straight comparison of repair cost versus replacement cost, so you can decide with real numbers instead of a guess.
Age matters less than you'd think for the common repairs. Spring and roller specs are standardized across most manufacturers.
Licensed technicians, flat-rate pricing, and a truck that's already stocked for your fix.
☎ Call +1-831-293-1591From downtown Severance to the outer neighborhoods, dispatch is built to reach you quickly.
Embedded Map Placeholder for Severance, CO